- Oliver (Boinx)
- Last Active
- Member, Administrator, Moderator, Boinx Employee
re: ATEM forum topic "Blackmagic Key & Fill - SDI Playout"
You asked me to sent the mimoLive documemnt.
I've zipped the file and put it on Dropbox:February 21
Oliver (Boinx)Hi Danny, Thanks for sending the document. I see you're using the ATEM controller layer. One thing I noticed: In the ATEM Controller layer, the "Program" source should be set to "none" if you play out the mimoLive video through key and fill to the ATEM. Otherwise you may be feeding the video from the switcher in a loop through mimoLive.
There are two different ways to use mimoLive with an ATEM:
1) You feed the video from the switcher into mimoLive, add the graphics and use mimoLive to record or stream your program out.
2) You use mimoLive purely for sending graphics to the ATEM switcher with key/fill. You can use the ATEM layer to control the ATEM, but the program out from the ATEM should not go into mimoLive in this scenario.
I will have Achim check the document with our UltraStudio 4K for more when he is back from vacation next week.
Thank you for your patience.
HELP, My sports pack subscription has renewed but remains expired in my mimolive, I have a show tonight with sports layers used. Phone support could not help. Please Help Laurence +61433042326November 2018
I love Mimolive and i'm so proud of this software, However i was literally forced into using Wirecast because it's windos capture is soo much smoother on the setup i have. I use mimolive for sooo much and i playout through My BlackMagic Intensity Shuttle. For some strange reason wirecast setup is so much smoother than it is with mimolive and i hate (Wirecast, OBS, VMIX). These are what some of my affiliates use and we all agree that mimolive is soo much better with out the glitches. Window catpure in mimolive uses sooo muuch of my computer's resources that i just start Lagging-Freezing-Sticking. Please i beg you guys to please fix this. in 20 minutes My playout to My Intensity shuttle had 2158 Dropped frames. ah mean..... WHAT!!! What is going on. please help!! I need mimolive to work.August 2018
Two main feature suggestions for future releases.
1. Midi Mapping Mimo live? (Connect a midi Controller via USD to trigger controls) Mixemegency have done it so well and it is really awesome since it reduces your interaction with the laptop once you have programed you controls. see this example
2.Can the layers be timed to be live and off at specific intervals. For instance if i want lower thirds, titles, sidebar adds etc to appear at intervals of lets say 5mins, 10mins, 20mins repeatedly without having to manually trigger.
Looking forward to see this in future release, Mimo is the best.May 2018
Hi Oliver I am trying to find out if istopmotion for Mac will work for me. I am running OS High Sierra 10.13. Many thanks DavidMarch 2018
I was wondering if you had received a Newtek PTZ NDI Camera yet? As there is no current dedicated PTZ NDI controller and I find both the Newtek and Sienna software control awkward and cumbersome, having control like the PTZ optics layer would be a dream, but we know that.
Whats more important is that I can not see the NDI output form the PTZ in Mimolive and was wondering if you have been able to test it out.
Oliver (Boinx)Laurence, we are working on the NewTek NDI|HX camera as we speak. Should be available soon.
I recently tested the camera with mimoLive and did not have any connection issues: https://www.youtube.com/watch?v=gUK3EQXJZyU
I would look for problems in the network (like the switch not passing multicast packets or DHCP/IP Number issues).
How to use webpresenter with gotomeeting
I have webpresenter I wanna use with gotomeeting
Advanced thanksNovember 2017
was hoping you would respond to last question on
' How do i import a GIF into FotoMagico 'April 2017
Thanks for sticking with us for 3 years.April 2014
Thanks for sticking with us for 2 years.April 2013
Oliver (Boinx)Finally opening the forum to the public.April 2011
Oliver (Boinx) joined.Welcome Aboard!April 2011