›

mimocall

Is there a way to output a mimocall guest directly to an separate video output and send it to a display?

Comments

  • edited February 23

    @janols Thanks for using mimoLive and mimoCall.

    Yes, there is a way to do this:
    - Set up a Placer Layer with the caller's video at the bottom of the layer stack below everything else.
    - Add a Syphon Sender layer directly above it.
    - Open a second document.
    - In the second document, add a Syphon Source and select the output from the first document.
    - Play out the second document full screen to an external display.

    Let me know if that works for you.

  • edited February 25

    you could also use the Syphon Simple Client (playback on 2nd screen/projector), it might use less system resources & be easier to setup: https://github.com/Syphon/Simple/releases/tag/version-3

    You'll still have to do the initial setup in ML for the output but in case your machine is like mine (getting old & almost maxed out as it is), this might help.

  • also, if you have a Blackmagic Design device that can output video, you can use this free utility from VDMX called Black Sypohon on the output side as it lets you pipe in a Syphon source right to the output on the device, so you can go straight to a projector or display. I used this last month to change between a desktop and iOS device during a presentation and worked well.

    https://vdmx.vidvox.net/blog/black-syphon

Sign In or Register to comment.