›

Mimolive 4.0 magewell HDMI aspect ratio

Since 4.0 upgrade I found that the HDMI resolution always switch to 1920x1080. I set it to 1600x1200 because I want 4x3 but it always reset to 1080p on restart.

Another small problem for a while (not new in 4.0) is with the lower third layer. When i first turn it on, the output always jitter a bit. It only happens the first time and then it is okay. So it is a workaround.

BTW is there a better way to report bugs?

Comments

  • @Jason Lee Thank you for taking the time to report this. Can you post a video of the Lower Third problem? The recommended way for reporting bugs is this form, but feel free to keep posting in the forum.

  • Since 4.0 upgrade I found that the HDMI resolution always switch to 1920x1080. I set it to 1600x1200 because I want 4x3 but it always reset to 1080p on restart.

    Since video sources are abstract, mimoLive always tries to set it to the resolution closest to the actual document output resolution. I would love to see a screenshot that shows why you want to use 4x3 on a 1080p video?

  • My document is 16x9 (1280 x 720) but my video input source is 4x3 (1080 x 768). So I need to configure my input source to 4x3 otherwise the picture will be widened.

    16x9 incorrect aspect ratio

    After I change it to 1600x1200, it will be corrected:

    4x3 correct aspect ratio

    but the preference will not be saved. It only happens after upgrade to 4.0 (screen resolution choice not saved)

  • The lower third problem video:

    lower third Jittering clip

Sign In or Register to comment.